Description

✅ Product Overview

Brand: AOSILE
Model: AS-986
Type: Concrete mold release agent
Appearance: Brown liquid
PH Value: Neutral (7–8)
Package: 20L/50L/200L/1000L

AS-986 is specially designed for concrete slatted floor (manure board) demolding. It provides excellent separation between concrete and molds, resulting in smooth, clean surface finishes without pores, streaks, or residue. It enhances mold protection and extends service life.

🔍 Key Features

• Strong Release Effect: Ensures easy removal of precast concrete products without sticking.
• Smooth Surface Finish: Leaves no bubbles, streaks, or oil marks on the final product.
• Universal Compatibility: Suitable for steel, aluminum, wood, and plastic molds.
• Safe & Eco-Friendly: Non-toxic, non-corrosive, odorless, and free of harmful solvents.
• High Efficiency: Coverage rate is ≤3.0g/㎡, saving material and labor.
• Moisture Resistance: Provides good demolding effect even in humid environments.

⚙️ Applications

• Concrete livestock flooring
• Slatted panels for pig farms and cattle barns
• Precast concrete components requiring clean surface and high durability

🧪 Usage Instructions

• Dilution Ratio: Mix with water at a ratio of 1:20–1:40 before use.
• Application Method: Spray evenly onto the cleaned mold surface using spray gun or brush. Wait for surface drying before pouring concrete.
• Best Practice: Avoid excessive application to prevent mold buildup and loss of definition.

📦 Packaging & Storage

• Storage: Store in a dry, ventilated place between 5°C–35°C.
• Shelf Life: 36 months

🏆 Why Choose AOSILE

• Over 15 years of experience in mold release agent production
• 3000+ cooperative clients across 50+ countries
• In-house R&D and custom formula solutions
• Excellent technical support and fast delivery

Common problems when removing slatted floors from molds:

1. Rough or chipped hole edges
   If the release agent is not sprayed evenly or doesn’t work properly, the concrete will stick to the mold cores (the parts that form the holes). When you try to pull the floor out, the edges of the holes can tear off, leaving sharp bumps or chips. This can hurt animals’ feet or even damage their nipples when they walk on it.

2. Hidden cracks and weak spots
   If the floor sticks to the mold in some places, workers have to hit it hard with hammers, pry bars, or high-pressure air guns to get it out. This banging and prying can cause tiny cracks inside the floor that you can’t see. These hidden cracks make the floor weaker over time, and it may suddenly break under heavy animals.

3. Rough surface with pits and bubbles
   Using cheap or poor-quality release agent (especially if it’s too thick or spread unevenly) will leave the floor surface rough, with small holes (pits) and bubbles. This rough surface traps manure and dirt. You can’t wash it off easily, so waste stays there, bacteria grow, and animals get sick.

What our release agent does:
Our product gives you perfect, easy release. You can dilute it with diesel at a ratio of 1 part release agent to 20–40 parts diesel. It forms a thin, strong, and even film on the mold surface — even around the complex hole areas. After demolding, your slatted floors will have smooth, bubble-free surfaces and even colors. No sticking, no damage, no rough spots.