Description

🧴 Product Introduction

• This product is a specialized release agent for concrete products.
• Applicable to PC prefabricated components, partition wall board molds, etc.
• Suitable mold materials: steel molds, iron molds, wood molds, aluminum molds.
• Environmentally friendly, non-toxic, corrosion-resistant, rustproof, and free from the hidden dangers of mineral oil.
• Ensures uniform concrete surface color after demolding, with a smooth and bubble-free finish.
• Dilution ratio: can be diluted with water at a ratio of 1:10–1:15, offering high cost performance.
• Net weight: 20 kg/barrel.

⚙️ Product Performance

• Appearance: Milky white liquid, pH: neutral (7–8).
• Emulsion stability: stable emulsion, ready-to-use after dilution.
• Release performance: easy release, flat and smooth concrete surface.
• Adhesion to concrete: ≤3.0g/㎡, corrosion-free to mold materials.
• Water resistance: good resistance to water flushing.

🧪 Method of Application

1. Dilution Ratio: Dilute at a ratio of 1:10 to 1:15 with water. Shake well before use.
2. Preparation: Mix 1 kg of concentrate with 10 kg of water (1:10). Use a sprayer to apply a thin, even layer at a distance of 40–50 cm from the mold surface.
3. Dry Time: Allow to dry for 5–10 minutes. Ensure there is no excess. If powder appears, increase the dilution ratio (e.g., 1:11 or 1:12) until no residue remains.

🔧 Attention to Construction

1. Before spraying, ensure the mold surface is clean, free of concrete residues, rust, or debris.
2. Follow dilution and dosage instructions strictly.
3. Always apply release agent before pouring concrete.
4. Use a brush or cloth to evenly coat difficult areas.
5. Reapply if mold boards are exposed to rain or rinsing before pouring concrete.

📸 Application Scenarios

• Suitable for precast PC walls, panels, columns, and decorative concrete components.
• Frequently used in PC factories, prefab construction plants, and high-efficiency production lines.